Configuring Radius, Tacacs+, And Ssh (Web Interface); Configuring Radius (Web Interface) - Juniper MEDIA FLOW CONTROLLER 2.0.4 - ADMINISTRATOR S GUIDE AND CLI Administrator's Manual

Media Flow Controller Configuration Tasks (Web Interface)

Configuring RADIUS, TACACS+, and SSH (Web Interface)

Before you configure Media Flow Controller for the first time, see
Flow Controller" on page
RADIUS (Remote Authentication Dial In User Service) is a networking protocol that provides
centralized access, authorization and accounting management for people or computers to
connect and use a network service.
TACACS+ (Terminal Access Controller Access-Control System Plus) is a protocol that
provides access control for routers, network access servers and other network devices via one
or more centralized servers. TACACS+ provides separate authentication, authorization and
accounting services. TACACS+ servers are tried in the order they are configured.
Secure Shell or SSH is a protocol, using a client-server model, for exchanging data using a
secure channel between two network devices. SSH uses public-key cryptography to
authenticate the remote computer; the remote computer can also be authenticated (optional).
SSH is used to log into remote machines and execute commands, but it also supports
tunneling, and SFTP or SCP protocol file transfers. The standard SSH port is TCP port 22.

Configuring RADIUS (Web Interface)

RADIUS (Remote Authentication Dial In User Service) is a networking protocol that provides
centralized access, authorization and accounting management for people or computers to
connect and use a network service.
To configure RADIUS:
•
From the left navigation pane in the System Config tab, select RADIUS.
The RADIUS page is displayed. See
134 Configuring RADIUS, TACACS+, and SSH (Web Interface)
58.
Figure
Media Flow Controller Administrator's Guide
"Before You Configure Media
22.
Copyright © 2010, Juniper Networks, Inc.