Aaa Authorization Config-Commands - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

aaa authorization config-commands

[ no ] aaa authorization config-commands
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Reauthorizes the use of Global Configuration commands. This command is enabled
Description
by default when the aaa authorization commands command is executed. The no
version disables AAA configuration command authorization.
NOTE: Using the no version can potentially reduce the amount of administrative
control on configuration commands.
Global Configuration
Mode
38
aaa authorization config-commands