Aaa Authorization - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

aaa authorization

aaa authorization { exec | commands level } authorListName authMethod
Syntax
[ authMethod ]*
no aaa authorization { exec | commands level } authorListName
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets parameters that restrict a user's access to a network. The no version disables
Description
authorization for a function.
Options
Global Configuration
Mode
exec Runs authorization to determine if the user is allowed to run Exec mode
commands
level Privilege level of commands for which authorization is run; in the range
0–15
authorListName—Name of the authorization methods list of up to 32 characters
authMethod Authorization method:
if-authenticated Allows the user to access the requested function if the user
is authenticated
none NAS does not request authorization information; authorization is not
performed over this line
tacacs+ NAS exchanges authorization information with the TACACS+
security daemon
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Chapter 2: A Commands
37
aaa authorization