Disconnect Ssh - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

disconnect ssh

Syntax
Release Information
Description
Options
Mode
522
disconnect ssh { vty vtyId | sessionId }
Command introduced before JunosE Release 7.1.0.
Terminates an active SSH session. Use the show ip ssh command to determine the
session identifier for the session to terminate. There is no no version.
vtyId—Virtual terminal identifier for VTY where the SSH session resides; use the show
users command to determine the identifier
sessionId—Integer in the range 0–4294967295 that identifies the session to be
terminated
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.