Aaa Authentication Default - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

aaa authentication default

aaa authentication subscriberType default authenticator [ authenticator ]*
Syntax
no aaa authentication subscriberType default
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the authentication method used for a particular type of subscriber. The no
Description
version produces the same result as specifying the radius value.
Options
Global Configuration
Mode
34
aaa authentication default
subscriberType—Type of subscriber:
atm1483 Specifies ATM 1483 subscribers
ip Specifies IP subscriber management interfaces
ipsec Specifies IPSec subscribers
ppp Specifies PPP subscribers
radius-relay Specifies RADIUS relay server subscribers
tunnel Specifies tunnel subscribers
authenticator Authentication method:
none Disables authentication, allowing all users access
local Enables local authentication; supported for PPP subscribers only
radius Enables RADIUS for authentication
* Indicates that one or more parameters can be repeated multiple times
in a list in the command line