Disconnect-Cause - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

disconnect-cause

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] disconnect-cause
Command introduced before JunosE Release 7.1.0.
Enables an E Series LNS to generate, for the L2TP session to which the L2TP host profile
applies, a PPP Disconnect Cause Code attribute value pair (AVP) and include it in all
L2TP Call-Disconnect-Notify (CDN) messages that it sends to an LAC. This action provides
a mechanism for the LAC to obtain information about the cause of a session
disconnection. The no version disables generation of the PPP Disconnect Cause Code
AVP, which is the default setting.
L2TP Destination Profile Host Configuration
Chapter 5: D Commands
521