Aaa Accounting Interval - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

aaa accounting interval

aaa accounting interval period
Syntax
no aaa accounting interval
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the default accounting interval used for all users and services. The no version
Description
sets the value to 0, which turns off interim accounting.
NOTE: This command is deprecated and might be removed completely in a future
release. Use the aaa service accounting interval and aaa user accounting interval
commands to configure default accounting intervals for services and users.
Options
Global Configuration
Mode
30
aaa accounting interval
period Accounting interval in minutes in the range 10–1440, which sets the
time period between accounting updates