Disable; Disable (Interface); Disable (Link Protection) - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

disable

See the following sections:

disable (Interface)

disable;
Syntax
[edit interfaces interface-name],
Hierarchy Level
[edit interfaces interface-name unit logical-unit-number],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before JUNOS Release 7.4.
Release Information
Disable a physical or a logical interface, effectively unconfiguring it.
Description
NOTE: When you use the
depending on the PIC type, the interface might or might not turn off the laser. Older
PIC transceivers do not support turning off the laser, but newer Gigabit Ethernet (GE)
PICs with SFP and XFP transceivers do support it and the laser will be turned off
when the interface is disabled.
WARNING: Do not stare into the laser beam or view it directly with optical instruments
even if the interface has been disabled.
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
disable (Interface) on page 1073
disable (Link Protection) on page 1074
disable
Disabling a Physical Interface on page 152
Disabling a Logical Interface on page 179
Chapter 62: Summary of Interface Configuration Statements
statement at the edit interfaces
disable (Interface)
hierarchy level,
1073