Mfr Retry - H3C SR8800 Command Reference Manual

10g core routers, layer 2 - wan
Hide thumbs Also See for SR8800:
Table of Contents

Advertisement

Description
Use the mfr link-name command to set the frame relay bundle link identification (LID).
Use the undo mfr link-name command to restore the default.
By default, the LID is the name of the physical interface.
Use the link-protocol fr mfr command to configure the current physical interface as a multilink frame relay
bundle link before using the mfr link-name command to configure.
The peer equipment identifies a frame relay bundle link via LID or associates the bundle link with a frame
relay bundle by using LID. A LID is locally valid, and the LIDs at the two ends of a link can be the same.
Examples
# Set the bundle LID of the multilink frame relay bundle link Serial 4/1/8:10 to be bl1.
<Sysname> system-view
[Sysname] interface Serial 4/1/8:10
[Sysname-Serial4/1/8:10] link-protocol fr MFR 4/1/6
[Sysname-Serial4/1/8:10] mfr link-name bl1

mfr retry

Syntax
mfr retry number
undo mfr retry
View
Frame relay interface view
Default level
2: System level
Parameters
number: The maximum times that a bundle link can resend hello messages, in the range 1 to 5.
Description
Use the mfr retry command to set the maximum times that a frame relay bundle link can resend hello
message when waiting for a hello acknowledgement message.
Use the undo mfr retry command to restore the default.
By default, the maximum times that a frame relay bundle link can resend hello message is twice.
The bundle link sustains link status by periodically sending hello message to the peer end. If the times that
a bundle link resends hello message reach the maximum without receiving acknowledgement from the
peer, the system will regard the link protocol on the bundle link to be malfunctioning.
You can configure this command only after the link-protocol fr mfr command is used to associate a frame
relay bundle link interface with a frame relay bundle.
Examples
# Configure the bundle link Serial 4/1/8:10 to resend hello message for 3 times at most.
<Sysname> system-view
[Sysname] interface Serial 4/1/8:10
[Sysname-Serial4/1/8:10] link-protocol fr MFR 4/1/6
92

Advertisement

Table of Contents
loading

Table of Contents