Dot1X Quiet-Period - H3C S3100 Series Command Manual

In Ethernet port view, the interface-list argument is not available and the commands apply to only the
current Ethernet port.
Related command: display dot1x.
Example
# Specify to authenticate users connected to Ethernet1/0/1 port by port numbers.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x port-method portbased interface Ethernet 1/0/1

dot1x quiet-period

Syntax
dot1x quiet-period
undo dot1x quiet-period
View
System view
Parameter
None
Description
Use the dot1x quiet-period command to enable the quiet-period timer.
Use the undo dot1x quiet-period command to disable the quiet-period timer.
When a user fails to pass the authentication, the authenticator system (such as an H3C series Ethernet
switch) will stay quiet for a period (determined by the quiet-period timer) before it performs another
authentication. During the quiet period, the authenticator system performs no 802.1x authentication of
the user.
By default, the quiet-period timer is disabled.
Related commands: display dot1x, dot1x timer.
Example
# Enable the quiet-period timer.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x quiet-period
1-14