Dot1X Quiet-Period - H3C s3100 series Command Manual

Description
Use the dot1x port-method command to specify the access control method for specified Ethernet
ports.
Use the undo dot1x port-method command to revert to the default access control method.
By default, the access control method is macbased.
This command specifies the way in which the users are authenticated.
If you specify to authenticate users by MAC addresses (that is, executing the dot1x port-method
command with the macbased keyword specified), all the users connected to the specified Ethernet
ports are authenticated separately. And if an online user logs off, others are not affected.
If you specify to authenticate supplicant systems by port numbers (that is, executing the dot1x
port-method command with the portbased keyword specified), all the users connected to a
specified Ethernet port are able to access the network without being authenticated if a user among
them passes the authentication. And when the user logs off, the network is inaccessible to all other
supplicant systems either.
Changing the access control method on a port by the dot1x port-method command will forcibly log
out the online 802.1x users on the port.
In system view:
If you do not provide the interface-list argument, these two commands apply to all the ports of the
switch.
If you specify the interface-list argument, these commands apply to the specified ports.
In Ethernet port view, the interface-list argument is not available and the commands apply to only the
current Ethernet port.
Related command: display dot1x.
Example
# Specify to authenticate users connected to Ethernet1/0/1 port by port numbers.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x port-method portbased interface Ethernet 1/0/1

dot1x quiet-period

Syntax
dot1x quiet-period
undo dot1x quiet-period
View
System view
Parameter
None
Description
Use the dot1x quiet-period command to enable the quiet-period timer.
1-13