Leica Captivate Technical Reference Manual page 991

Volume Calculation
Results,
Summary page
QuickVolume
Next step
OK calculates the volume and continues to Volume Calculation Results.
Key Description
Store To return to Surface Name.
Page To change to another page on this panel.
Description of fields
Field Option
Surface Display only
name
Point ID Display only
Height Display only
Area Display only
Net volume Display only
Volume Display only
above refer-
ence sur-
face
Volume Display only
below refer-
ence sur-
face
Next step
3D viewer provides an interactive display of the data.
Description
Name of the surface used for the calculation.
The point to which the volume is calculated.
Available for Volume calculation
method: Surface to point.
The elevation of the point to which the vol-
ume is calculated. Available for Volume cal-
culation method: Surface to entered
height and Volume calculation
method: Surface to point.
Area of the base plane.
Volume of the surface.
Cut of the volume. Available for Volume cal-
culation method: Surface to entered
height and Volume calculation
method: Surface to point.
Fill of the volume. Available for Volume cal-
culation method: Surface to entered
height and Volume calculation
method: Surface to point.
991