Event Input Notify Message Format - Leica Captivate Technical Reference Manual

Appendix G
Description
Example
Syntax in ASCII
Description of the
fields
Example
1034

Event Input Notify Message Format

With GS25, a message can be created. This message provides information
about
• the fact that an event was detected by the receiver
the time when the event was detected.
•
The message can be in ASCII or in binary format. It is sent to a connected
device, for example a PC.
Refer to "18.12 Event input 1/Event input 2" for configuring the event input
interface.
$PLEIR,HPT,134210000,1203*17
$PLEIR,EIX,sssssssss,tttttttt,nnnn,cccc,dddd*hh<CR><LF>
Field Description
$PLEIR Header
EIX Message identifier.
X = 1 for port E1
X = 2 for port E2
ssssssssss GPS time of week of event in ms
tttttttt GPS time of week of event in ns
nnnn GPS week number
cccc Event count
dddd Event pulse count
This is the count of all pulses including those violating the
specified accuracy limit boundary conditions set in Event
Input 1/Event Input 2, Event input page. This allows
determination of missed events.
*hh Checksum
<CR> Carriage return
<LF> Line feed
$PLEIR,EI2,292412000,28932,1203,203,1*70
Event Input Notify Message Format