Operating Principles; Point Search - Leica TS01 User Manual

3.5
Turn instrument
on/off
Alphanumeric keypad
Edit fields
3.6
Description
Direct search
26
Key Description
Dist To execute a distance measurement.
View To view details about the selected item.
Letter To change the keypad operation to alphanumerical.
Number To change the keypad operation to numerical.
To display the next softkey level.

Operating Principles

Button Description
To turn the instrument on or off, use the On/Off key on the
keyboard of the instrument.
The alphanumerical keypad is used to enter characters directly into editable
fields.
Numeric fields: Can only contain numerical values. By pressing a key of
•
the keypad the number will be displayed.
• Alphanumeric fields: Can contain numbers and letters. By pressing a
key of the keypad the first character written above that key will be dis-
played. By pressing several times you can toggle through the characters.
For example: 1->S->T->U->1->S....
When the alphanumeric mode is active, numbers are not selectable. For
example: T=>U=> V=>T....
Button Description
ESC deletes any change and returns to previous panel.
☞
Moves the cursor to the left
Moves the cursor to the right.

Point Search

Pointsearch is a function to find measured points or fixpoints in the memory
storage.
It is possible to limit the point search to a particular job. The search proced-
ure always finds fixpoints before measured points that fulfil the same search
criteria.
By entering an actual point number, for example 402, and pressing Search, all
points within the selected job and with the corresponding point number are
found.
Key Description
Search To search for matching points within the selected job.
User Interface