Module Stop Control Register (Mstpcr) - Renesas H8S Series Hardware Manual

11.2.9

Module Stop Control Register (MSTPCR)

Bit : 15 14
Initial value : 0 0
R/W : R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
MSTPCR is a 16-bit readable/writable register that performs module stop mode control.
When the MSTP11 bit in MSTPCR is set to 1, PPG operation stops at the end of the bus cycle and a transition is made to
module stop mode. Registers cannot be read or written to in module stop mode. For details, see section 21.5, Module Stop
Mode.
MSTPCR is initialized to H'3FFF by a reset and in hardware standby mode. It is not initialized in software standby mode.
Bit 11—Module Stop (MSTP11): Specifies the PPG module stop mode.
Bit 11
MSTP11
0
1
Rev.6.00 Oct.28.2004 page 422 of 1016
REJ09B0138-0600H
MSTPCRH
13 12 11 10
1 1 1 1
Description
PPG module stop mode cleared
PPG module stop mode set
MSTPCRL
9 8 7 6 5
1 1 1 1 1
4 3 2 1 0
1 1 1 1 1
(Initial value)