Renesas H8S Series Hardware Manual page 366

16-bit single-chip microcomputer

Hide thumbs Also See for H8S Series:

Table of Contents

• A/D converter conversion start trigger can be generated

 Channel 0 to 5 compare match A/input capture A signals can be used as A/D converter conversion start trigger

• Module stop mode can be set

 As the initial setting, TPU operation is halted. Register access is enabled by exiting module stop mode.

Table 10-1 lists the functions of the TPU.

Rev.6.00 Oct.28.2004 page 338 of 1016

REJ09B0138-0600H