Differences Between Boot Mode And User Program Mode; 19.15.7 Block Configuration - Renesas H8S Series Hardware Manual

16-bit single-chip microcomputer

Hide thumbs Also See for H8S Series:

Table of Contents

19.15.6 Differences between Boot Mode and User Program Mode

Table 19-30 Differences between Boot Mode and User Program Mode

Entire memory erase

Programming control program*

Note: * To be provided by the user, in accordance with the recommended algorithm.

Products include 256 kbytes of flash memory are divided into three 64-kbyte blocks, one 32-kbyte block, and eight 4-

kbyte blocks.

Program/program-verify

Address H'00000

Address H'3FFFF

Figure 19-42 Flash Memory Block Configuration

User Program Mode

Erase/erase-verify/program/

program-verify/emulation

4 kbytes × 8

Rev.6.00 Oct.28.2004 page 625 of 1016

REJ09B0138-0600H