Renesas H8S Series Hardware Manual page 393

Bit 1—Input Capture/Output Compare Flag B (TGFB): Status flag that indicates the occurrence of TGRB input
capture or compare match.
Bit 1
TGFB
0
1
Bit 0—Input Capture/Output Compare Flag A (TGFA): Status flag that indicates the occurrence of TGRA input
capture or compare match.
Bit 0
TGFA
0
1
Description
[Clearing conditions]
•
When DTC is activated by TGIB interrupt while DISEL bit of MRB in DTC is 0
•
When 0 is written to TGFB after reading TGFB = 1
[Setting conditions]
•
When TCNT = TGRB while TGRB is functioning as output compare register
•
When TCNT value is transferred to TGRB by input capture signal while TGRB is
functioning as input capture register
Description
[Clearing conditions]
•
When DTC is activated by TGIA interrupt while DISEL bit of MRB in DTC is 0
•
When DMAC is activated by TGIA interrupt while DTA bit of DMABCR in DMAC is
1
•
When 0 is written to TGFA after reading TGFA = 1
[Setting conditions]
•
When TCNT = TGRA while TGRA is functioning as output compare register
•
When TCNT value is transferred to TGRA by input capture signal while TGRA is
functioning as input capture register
(Initial value)
(Initial value)
Rev.6.00 Oct.28.2004 page 365 of 1016
REJ09B0138-0600H