Renesas H8S Series Hardware Manual page 656

Bit 3—Erase-Verify (EV): Selects erase-verify mode transition or clearing. Do not set the SWE, ESU, PSU, PV, E, or P
bit at the same time.
Bit 3
EV
0
1
Bit 2—Program-Verify (PV): Selects program-verify mode transition or clearing. Do not set the SWE, ESU, PSU, EV,
E, or P bit at the same time.
Bit 2
PV
0
1
Bit 1—Erase (E): Selects erase mode transition or clearing. Do not set the SWE, ESU, PSU, EV, PV, or P bit at the same
time.
Bit 1
E
0
1
Bit 0—Program (P): Selects program mode transition or clearing. Do not set the SWE, PSU, ESU, EV, PV, or E bit at
the same time.
Bit 0
P
0
1
Rev.6.00 Oct.28.2004 page 628 of 1016
REJ09B0138-0600H
Description
Erase-verify mode cleared
Transition to erase-verify mode
[Setting condition]
When SWE = 1
Description
Program-verify mode cleared
Transition to program-verify mode
[Setting condition]
When SWE = 1
Description
Erase mode cleared
Transition to erase mode
[Setting condition]
When SWE = 1, and ESU = 1
Description
Program mode cleared
Transition to program mode
[Setting condition]
When SWE = 1, and PSU = 1
(Initial value)
(Initial value)
(Initial value)
(Initial value)