Renesas H8S Series Hardware Manual page 608

16-bit single-chip microcomputer

Hide thumbs Also See for H8S Series:

Table of Contents

Differences between Boot Mode and User Program Mode

Table 19-9 Differences between Boot Mode and User Program Mode

Entire memory erase

Programming control program*

Note: * To be provided by the user, in accordance with the recommended algorithm.

Block Configuration: The flash memory is divided into two 32-kbyte blocks, two 8-kbyte blocks, one 16-kbyte block,

one 28-kbyte block, and four 1-kbyte blocks.

Rev.6.00 Oct.28.2004 page 580 of 1016

REJ09B0138-0600H

Program/program-verify

Address H'00000

Address H'1FFFF

Figure 19-13 Flash Memory Block Configuration

User Program Mode

Program/program-verify

Erase/erase-verify