Renesas H8S Series Hardware Manual page 414

16-bit single-chip microcomputer

Hide thumbs Also See for H8S Series:

Table of Contents

Figure 10-26 shows an example of PWM mode 2 operation.

In this example, synchronous operation is designated for channels 0 and 1, TGR1B compare match is set as the TCNT

clearing source, and 0 is set for the initial output value and 1 for the output value of the other TGR registers (TGR0A to

TGR0D, TGR1A), to output a 5-phase PWM waveform.

In this case, the value set in TGR1B is used as the cycle, and the values set in the other TGRs as the duty.

Rev.6.00 Oct.28.2004 page 386 of 1016

REJ09B0138-0600H

Figure 10-26 Example of PWM Mode Operation (2)

Counter cleared by TGR1B

compare match