Cogo; Starting - Leica TS03 User Manual

Access
Remote height
measurement
Remote Height -
Result - Aim at
remote point!
Next step
7.11
7.11.1
Description
114
1. Select Apps from the Main Menu.
2. Select Remote Ht from the Programs Menu.
3. Complete app pre-settings. Refer to "6 Apps - Getting Started".
Measure to the base point or press hr=? to determine an unknown target
height.
Next step
After measuring, the Aim at remote point! screen appears.
Aim the instrument at the inaccessible remote point.
Description of fields
Field Option
D Display only
Height Display only
East Display only
North Display only
Display only
ΔEast
Display only
ΔNorth
Display only
ΔHeight
Either, press Cont to save the measurement and record the calculated
•
coordinates of the remote point.
• Or, press Base to enter and measure a new base point.
Or, press ESC to exit the app.
•

COGO

Starting

COGO is an app used to perform coordinate geometry calculations such as,
coordinates of points, bearings between points and distances between points.
The COGO calculation methods are:
• Inverse and Traverse
Intersections
•
Offset
•
Extension
•
Description
Height difference between the base point
and the remote point.
Height of the remote point.
Calculated Easting coordinate for the remote
point.
Calculated Northing coordinate for the
remote point.
Calculated difference in Easting coordinate
between the base point and the remote
point.
Calculated difference in Northing coordinate
between the base point and the remote
point.
Calculated difference in Height between the
base point and the remote point.
Apps