Cogo (Optional) - Leica Builder Series User Manual

Builder, Application Programs, for Builder 200 or higher
10.8
Description


COGO (optional)

The application program COGO is an application program to perform coordinate
geometry calculations such as:
• Coordinates of points
• Directions between points
• Distances between points
The COGO calculation methods are:
• Intersections
• Line Extension
• Offset Line&Plane
• Traverse and Inverse
The application program COGO is only available for the Builder 300 or higher. The
program can be started in total 40 times for trial. Afterwards you have to enter the
license code.
128