Working With The Rtk Device - Leica Viva Series User Manual

4.4
Devices fitting into
the GS25 GNSS
instrument
Insert and remove a
slot-in-device
step-by-step
GS25, Operation

Working with the RTK Device

Digital cellular phones fitting into the GS25 GNSS instrument
Digital cellular phone
Telit UC864-G
Radios fitting into the GS25 GNSS instrument
Radio
Satelline M3-TR1, transceive
1
GS25_009
Step Description
1. Loosen the screws of the compartment cover with the supplied Allen key.
2. Remove the compartment cover.
3. Attach the slot-in-device to the compartment cover.
4. Insert the compartment cover into the compartment (port P3).
5. Tighten the screws.

All screws have to be tightened to ensure that the instrument is
waterproof.
6. Attach the antenna for the slot-in device to RTK device antenna port. Refer
to "Port PPS".

For the equipment setup as real-time base station with radio, it's recom-
mended to use an external radio antenna mounted on a second tripod. This
increases the height of the radio antenna and therefore maximises radio
coverage. Refer to the Leica Viva GNSS Getting Started Guide for detailed
information about the setup.
E 1
3
Device
SLG1-2
Device
SLR5-2
1
2
40