Show Pppoe Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show pppoe interface

Syntax
Release Information
Description
Options
Mode
1042
show pppoe interface [ interfaceType interfaceSpecifier ] [ delta ] [ filter ]
show pppoe interface [ full ] [ summary ]
Command introduced before JunosE Release 7.1.0.
Displays information about the PPPoE interface you specify. Use the summary keyword
to display information for all configured PPPoE interfaces.
interfaceType—One of the following interface types listed in Interface Types and
Specifiers on page 5 :
atm
fastEthernet
gigabitEthernet
lag
serial—PPPoE is not currently supported on serial interfaces
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
delta—Displays baselined statistics
filter—See Filtering show Commands on page 4
full—Displays configuration, status, and statistics information
summary—Displays administrative and operational status of all configured PPPoE
interfaces
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.