Show Qos-Parameter - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show qos-parameter

Syntax
Release Information
Description
Options
Mode
1056
To display settings for a specific parameter instance with references:
show qos-parameter [ qosParameterInstanceName ] references [ brief | full ] [ filter ]
To display references globally:
show qos-parameter [ qosParameterInstanceName ] references global
[ qosParameterInstanceName ] [ brief | full ] [ filter ]
To display references for interfaces:
show qos-parameter [ qosParameterInstanceName ] references [ interface interfaceType
interfaceSpecifier [ atmVpi | s-vlanIdValue ] ] [ explicit ] [ brief | full ]
[ filter ]
To display references for L2TP sessions:
show qos-parameter [ qosParameterInstanceName ] references lt2p session sessionName
[ explicit ] [ filter ]
Command introduced in JunosE Release 7.1.0.
full keyword added in JunosE Release 7.2.0.
Displays QoS parameter instance settings for QoS clients.
qosParameterInstanceName—Name of the parameter instance
references—Displays interfaces that reference this parameter instance
global—Displays information about global parameter instances
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
atmVpi—Virtual path identifier of this PVC; number in the range 0–255
s-vlanIdValue—S-VLAN ID number in the range 0–4095
sessionName —Name of the L2TP session
brief—Displays information in a condensed format
full—Displays information in expanded format
explicit—Displays parameter instances only on the specified interface and not parameter
instances stacked above the interface
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.