Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
show ppp interface
Syntax
Release Information
Description
Options
1038
show ppp interface [ interfaceType interfaceSpecifier ]
[ full | { dataRestriction }* [ protocolRestriction ]* ] [ state stateRestriction ]
[ delta ] [ filter ]
For multilinked PPP interfaces, the following options are additionally available:
show ppp interface mlppp [ interfaceSpecifier ] members [ filter ]
show ppp interface mlppp links [ filter ]
Command introduced before JunosE Release 7.1.0.
eap keyword added in JunosE Release 7.3.0.
Displays information about the PPP interface type that you specify.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
full—Displays configuration, status, and statistics information for the interface, including
information specific to LCP, IPCP, OSINLCP, MPLSCP, PAP, and CHAP; equivalent to
specifying config status statistics
dataRestriction—One or more of the following keywords; you can repeat a keyword
without effect
config—Displays information about the PPP interface configuration
status—Displays information about the PPP interface operational status
statistics—Displays information about the PPP interface statistics
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
protocolRestriction—One or more of the following keywords
eap—Displays EAP-specific information
lcp—Displays LCP-specific information
ip—Displays IPCP-specific information
ipv6—Displays IPv6CP-specific information
osi—Displays OSINLCP-specific information
mpls—Displays MPLSCP-specific information
pap—Displays PAP-specific information
chap—Displays CHAP-specific information
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
