Show Pppoe Subinterface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show pppoe subinterface

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show pppoe subinterface [ interfaceType interfaceSpecifier ] [ delta ] [ filter ]
show pppoe subinterface [ full ] [ summary ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays all available data for a specific PPPoE subinterface. Use the summary keyword
to display information for all configured PPPoE subinterfaces.
interfaceType—One of the following interface types listed in Interface Types and
Specifiers on page 5 :
atm
fastEthernet
gigabitEthernet
lag
serial—PPPoE is not currently supported on serial interfaces
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
delta—Displays baselined statistics
filter—See Filtering show Commands on page 4
full—Displays configuration, status, and statistics information
summary—Displays administrative and operational status of all configured PPPoE
subinterfaces
Privileged Exec, User Exec
Chapter 7: S Commands
1045