Show Pppoe Interface Lockout-Time - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show pppoe interface lockout-time

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show pppoe interface [ interfaceType interfaceSpecifier ] lockout-time [ filter ]
Command introduced in JunosE Release 7.2.0.
In configurations with dynamic PPPoE subinterfaces over static PPPoE major interfaces,
displays detailed information about the current encapsulation type lockout condition for
each PPPoE client associated with the dynamic PPPoE subinterface column. The output
of this command displays multiple entries for the same MAC Address, one for each
interworking function (IWF) PPPoE session, if multiple IWF sessions contain the same
MAC address.
interfaceType—One of the following interface types listed in "Interface Types and
Specifiers" on page 5:
atm
fastEthernet
gigabitEthernet
lag
serial—PPPoE is not currently supported on serial interfaces
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
1043