Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2244

•
If the snapshot command is entered after the policy port group command is configured, the resulting
ASCII file will include the following additional syntax for the policy port group command:
from {cli | ldap | blt}
This syntax indicates how the port group was created. The cli and ldap options may be changed by a
user modifying the ASCII file; however, changing this setting is not recommended. The blt option indi-
cates a built-in object, this setting is not configurable.
Examples
-> policy port group port_group4 3/1-2 4/3 5/4
-> policy port group port_group4 no 3/1-2
-> policy port group UserPorts 4/1-8 5/1-8
Release History
Release 6.1; command was introduced.
Related Commands
policy condition
qos apply
policy action maximum
bandwidth
show policy port group
MIB Objects
alaQoSPortGroupsTable
alaQoSPortGroupsName
alaQoSPortGroupsSource
alaQoSAppliedPortGroupsTable
alaQoSAppliedPortGroupsName
alaQoSAppliedPortGroupsSource
alaPortGroupTable
alaQoSPortGroupSlot
alaQoSPortGroupPort
alaQoSPortGroupPortEnd
alaAppliedPortGroupTable
alaQoSAppliedPortGroupSlot
alaQoSAppliedPortGroupPort
alaQoSAppliedPortGroupPortEnd
page 33-24
Configures a policy condition. A port group may be configured as part
of a policy condition.
Applies configured QoS and policy settings to the current configuration.
Configures a maximum bandwidth value for a policy action.
Displays information about policy port groups.
QoS Policy Commands
OmniSwitch CLI Reference Guide June 2012