Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2242

configurable by the user, but "Quarantined" is used by default if a different name is not specified. See
the qos quarantine mac-group
•
If the snapshot command is entered after the policy map group command is configured, the resulting
ASCII file will include the following additional syntax for the policy map group command:
from {cli | ldap | blt}
This syntax indicates how the map group was created. The cli and ldap options may be changed by a
user modifying the ASCII file; however, changing this setting is not recommended. The blt option indi-
cates a built-in object, this setting is not configurable.
Examples
-> policy mac group mac_group1 00:20:da:05:f6:23 00:20:da:05:f6:24
-> no policy mac group mac_group1
Release History
Release 6.1; command was introduced.
Related Commands
policy condition
qos apply
show policy mac group
MIB Objects
alaQoSMACGroupsTable
alaQoSMACGroupsName
alaQoSMACGroupsSource
alaQoSAppliedMACGroupsTable
alaQoSAppliedMACGroupsName
alaQoSAppliedMACGroupsSource
alaQoSMACGroupTable
alaQoSMACGroupMacAddr
alaQoSMACGroupMacMask
alaQoSAppliedMACGroupTable
alaQoSAppliedMACGroupMacAddr
alaQoSAppliedMACGroupMacMask
page 33-22
command for more information.
Configures a policy condition. A MAC group may be configured as part
of a policy condition.
Applies configured QoS and policy settings to the current configuration.
Displays information about policy MAC groups.
QoS Policy Commands
OmniSwitch CLI Reference Guide June 2012