Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual page 2246

-> policy vlan group vlan_group3 3000 3100-3105
-> no policy vlan group vlan_group2
-> policy vlan group vlan_group1 no 100-200
Release History
Release 6.3.4; command was introduced.
Related Commands
policy condition source vlan
policy condition inner source
vlan
qos apply
show policy vlan group
MIB Objects
alaQoSVlanGroupsTable
alaQoSVlanGroupsName
alaQoSVlanGroupsSource
alaQoSVlanGroupsStatus
alaQoSAppliedVlanGroupsTable
alaQoSAppliedVlanGroupsName
alaQoSAppliedVlanGroupsSource
alaQoSAppliedVlanGroupsStatus
alaQoSVlanGroupTable
alaQoSVlanGroupVlan
alaQoSVlanGroupVlanEnd
alaQoSVlanGroupStatus
alaQoSAppliedVlanGroupTable
alaQoSAppliedVlanGroupVlan
alaQoSAppliedVlanGroupVlanEnd
alaQoSAppliedVlanGroupStatus
page 33-26
Configures a source VLAN policy condition. A VLAN group may be
configured as part of this type of policy condition.
Configures an inner source VLAN policy condition. A VLAN group
may be configured as part of this type of policy condition.
Applies configured QoS and policy settings to the current configuration.
Displays information about policy VLAN groups.
QoS Policy Commands
OmniSwitch CLI Reference Guide June 2012