Dot1X Multicast-Trigger; Dot1X Port-Control - H3C S5120-SI Series Command Reference Manual

<Sysname> system-view
[Sysname] dot1x max-user 32 interface gigabitethernet 1/0/1
Or
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x max-user 32

dot1x multicast-trigger

Syntax
dot1x multicast-trigger
undo dot1x multicast-trigger
View
Ethernet Interface view
Default Level
2: System level
Parameters
None
Description
Use the dot1x multicast-trigger command to enable the multicast trigger function of 802.1X to send
multicast trigger messages to the clients periodically.
Use the undo dot1x multicast-trigger command to disable this function.
By default, the multicast trigger function is enabled.
Related commands: display dot1x.
Examples
# Enable the multicast trigger function for interface GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x multicast-trigger

dot1x port-control

Syntax
In system view:
dot1x port-control { authorized-force | auto | unauthorized-force } [ interface interface-list ]
undo dot1x port-control [ interface interface-list ]
In Ethernet interface view:
dot1x port-control { authorized-force | auto | unauthorized-force }
undo dot1x port-control
1-11