Dot1X Handshake - H3C S3100 Series Command Manual

Example
# Configure the switch to operate in the port-based authentication mode.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x port-method portbased
# Enable the Guest VLAN function for all the ports.
[Sysname] dot1x guest-vlan 1

dot1x handshake

Syntax
dot1x handshake enable
undo dot1x handshake enable
View
System view
Parameter
None
Description
Use the dot1x handshake enable command to enable the online user handshaking function.
Use the undo dot1x handshake enable command to disable the online user handshaking function.
By default, the online user handshaking function is enabled.
To enable the proxy detecting function, you need to enable the online user handshaking function
first.
Handshaking packets need the support of the H3C-proprietary client. They are used to test
whether or not a user is online.
As clients that are not of H3C do not support the online user handshaking function, switches cannot
receive handshaking acknowledgement packets from them in handshaking periods. To prevent
users being falsely considered offline, you need to disable the online user handshaking function in
this case.
Example
# Enable the online user handshaking function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x handshake enable
1-9