Preparation before surgery
Brightness
In the service menu, you can adjust a value for the
maximum duration of the GLOW800 mode from 10 to
180 seconds.
Open the "FL" tab to set the brightness in GLOW800 mode to an
X
X
adequate level.
Note We recommend to set the brightness to 100 % (Default).
Decide if the working distance limitation in white light mode
X
X
should be switched on (default) or off.
When the working distance limitation in white light mode is
switched off and the working distance is above the limit
when switching to GLOW800 mode, the working distance
will be reduced and the picture will get out of focus.
8.2
GLOW800 User settings menu
The tab offers specific GLOW800 settings for each user:
14
8.2.1
With «output mode» one of two types of fluorescence observation
can be chosen:
• White light object view with the embedded fluorescence signal
in pseudo color (white light fluorescence observation = WL/FL)
• Standard Black & White fluorescence view (Black & White
fluorescence observation = B & W/FL)
See as well Chapter 6.1.1, page 7
GLOW800 / Ref. 10 747 241 / Version 00
Output mode