Instrument Protection (Theft Protection) - Leica 3D Disto User Manual

9
Description
Activate PIN code
step-by-step
Deactivate PIN code
step-by-step
1.800.561.8187 3D Disto, Instrument Protection (Theft Protection)

Instrument Protection (Theft Protection)

The instrument can be protected by a Personal Identification Number. If the PIN
protection is activated, the software will always prompt for a PIN code entry after
starting up.
If the wrong PIN was entered three times, a PUK is required, which can be found on
the instrument delivery papers. If the PUK code was entered correctly, the PIN code is
set to default value "0" and the PIN protection is deactivated.
Contact your Leica Geosystems representative if you need a replacement PUK.
Step Description
1. Got to Menu » Device » Theft protection. Default setting is Off.
2. Press Enable to activate.
3. Enter your desired PIN code (3 to 8 character numeric or alpha).
4. Accept with Ok.

Now the instrument is protected against unauthorised use.
The PIN code is required now after switching on the instrument, de-activating
standby, or re-entering the PIN settings.
Step Description
1. Got to Menu » Device » Theft protection.
Press Disable to deactivate.
2. Enter your PIN code and press OK to accept.

The instrument is no longer protected against unauthorised use.
www.
information@itm.com
.com
66