Instrument Protection (Theft Protection) - Leica 3D Disto User Manual

3D Disto, Instrument Protection (Theft Protection)
10
Description
Activate PIN code
step-by-step

Instrument Protection (Theft Protection)

The instrument can be protected by a Personal Identification Number. If the PIN
protection is activated, the Control Unit will always prompt for a PIN code entry after
starting up. If the wrong PIN was entered three times, a PUK is required, which can
be found on the instrument delivery papers. If the PUK code was entered correctly,
the PIN code is set to default value "0" and the PIN protection is deactivated.
Contact your Leica Geosystems representative if you need a replacement PUK.
1. Start-up Control Unit as described in "5 Instrument Setup".
2. Go to Menu » Device » Theft Protection. Default setting is Off.
3. Press On to activate.
4. Enter your desired PIN code (3 to 8 character numeric or alpha).
5. Accept with Ok.
Now the instrument is protected against unauthorised use. The PIN code is required
now after switching on the instrument, de-activating standby, or re-entering the PIN
settings.
158