Radios For Gps Real-Time - Leica TPS1200+ Field Manual

22.3

Radios for GPS Real-Time

Description
Access
CONFIGURE
Radio Channel
Config...\Interfaces... - Controlling
the Device
For radios the channels on which the radio broadcasts can be changed. Changing
channels changes the frequency at which the radio operates.
Refer to "20.3.3 Controlling a Device" to access CONFIGURE Radio Channel.
Description of fields
Field Option
<Radio Type:>
Output
<Set Channel:>
Output
Manually
Auto
<Channel:>
User input
<Actual Freq:>
Output
CONT (F1)
SCAN (F5)
Description
The type of radio highlighted when
CONFIGURE Radio Channel was
accessed.
Available for <Radio Type:
AW100/2007400>.
The channel must be typed in manually.
A reference selects the clearest
frequency of the available channels.
A rover searches for the channel wjhere
data is transmitted.
Available unless <Set Channel: Auto>.
The radio channel. The minimum and
maximum allowed input values for a radio
depend on the number of channels
supported by the radio and the spacing
between the channels.
Available for Satelline 3AS radios.
Displays the actual frequency of the radio.
TPS1200+
To accept the changes and to
continue with the subsequent
screen.
Available unless <Set Channel:
Auto>. To find out information such
as the station ID, latency and the
data format of incoming signals from
reference stations.
143