Exporting Ascii Data - Leica TPS1200+ Field Manual

14.2

Exporting ASCII Data

Description
Requirements
Access
EXPORT
Export ASCII Data
from Job
80
The settings on this screen define the data that is converted and exported and what
format is used.
Data is exported from the selected job. Currently active view, filter and sort settings
are applied. The points that are exported are those that are visible in MANAGE
Data: Job Name.
At least one format file was created using LGO and has been transferred to the
System RAM.
Select Main Menu: Convert...\Export Data from Job\Export ASCII.
Description of fields
Field Option
<Export To:> CF Card,
Internal Memory if
fitted, or RS232
<Directory:> Data, GSI or /Root Available for <Export To: CF Card>. The
CONT (F1)
CONF (F2)
FILT (F4)
IFACE (F5)
CSYS (F6)
Description
Defines to where the exported file should
be written.
data can be exported to the \Data, the
\GIS or the root directory. Data must be
stored to the \GSI directory in order to
read it in a TPS1100. For <Export To:
Internal Memory>, the data is always
exported to the \Data directory.
TPS1200+
To export the data.
To define the default extension for
the export file and to select the
behaviour for the setup measure-
ments.
To set the sort and filter settings for
export. The setting for <Sort:> on the
Points page defines the order in
which points, lines and areas are
exported. The setting for <Filter:> on
each page defines which points, lines
or areas are exported.
Available for <Export To: RS232>.
To choose the port and device to
which the data should be exported.
To update the coordinate system in
which the coordinates are exported.
Convert...\Export Data from Job