Exporting Data - Leica TS03 User Manual

12.2
Description
XML Export
164
Menu item Description
USB-Stick Refer to "12.4 Working with a USB Memory Stick"and "B
Directory Structure".
To view, delete, rename and create folders and files stored
on the SD card.
SD Card
To view, delete, rename and create folders and files stored
on the internal memory. The internal memory has same
folder structure like USB stick.
Int. Memory
To view, create, edit and delete codes. To each code a
description and a maximum of 8 attributes with up to 16
characters each can be assigned.
Codes
To view and delete data format files.
Formats
To view, delete, link, unlink, sketch or view information of
screenshots taken and stored. Refer to "11.2 Sketching" for
sketching.
ScrShots

Exporting Data

Job data, format files, configuration sets and codelists can be exported from
the internal memory of the instrument. Data can be exported to:
USB memory stick
•
• SD card
Configured interface (Bluetooth, RS232 serial, WLAN)
•
USB memory stick, SD card
A USB memory stick or SD card can be inserted and removed. No additional
software is required for the transfer.
RS232 serial interface
A receiver, such as a laptop, is connected to the RS232 port. The receiver
requires Leica Infinity or another third-party software.
☞ If the receiver is too slow in processing data the data could be lost.
With this type of data transfer the instrument is not informed about
the performance of the receiver (no protocol). Therefore the success
of this type of transfer is not checked.
The exporting of XML data has some special requirements.
Data Management