system port-led trigger interface
system port-led trigger interface
Adds link-up and link-down of the specified physical port a trigger for automatic LED
operation.
Input format
To set or change information:
system port-led trigger interface
To delete information:
no system port-led trigger interface
Input mode
(config)
Parameters
<IF# list>
Specify the relevant port.
1.
2.
Default behavior
Link-up and link-down of a physical port are not regarded as conditions for automatic
operation.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
system port-led
72
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
See Specifiable values for parameters.
<IF# list>