36.1.12 Dhcp Snooping Information - Alaxala AX1250S Software Manual

36.1.12 DHCP snooping information

Table 36-12 DHCP snooping error messages
Message
Can't delete it because data is
not corresponding.
Can't delete it vlan
configuration referred by other
configuration.
Can't set it because snooping is
disable.
Can't set it because vlan
doesn't exist.
Duplicate entry.
Maximum number of entries are
already defined.
Relations between ip dhcp
snooping configuration and
channel-group configuration are
inconsistent.
Relations between ip source
binding configuration and
channel-group configuration are
inconsistent.
Relations between ip source
binding configuration and
switchport configuration are
inconsistent.
Relations between ip verify
source configuration and
channel-group configuration are
Explanation
Deletion is not possible because DHCP snooping for the specified
VLAN is not enabled or the specified configuration does not exist.
Deletion is not possible because the
uses the VLAN.
ip source binding
First, delete the
VLAN you want to delete.
The specified VLAN cannot be set because DHCP snooping for the
VLAN is not enabled.
Specify a VLAN for which DHCP snooping is enabled.
The VLAN specified by using
be deleted because it does not exist.
The VLAN specified by using
cannot be deleted because it does not exist.
The setting is not possible because the setting duplicates another
setting.
Delete the duplicated setting, and then set this again.
The number of specifiable VLAN setting items exceeds the value set
ip dhcp snooping
by using
The setting is not possible because the total number of configuration
settings and dynamic learning items for
exceeds the maximum number of binding database entries. Delete
unnecessary configuration settings or dynamic learning items, and
then set this again.
The number of VLANs set by using
exceeds the maximum number of specifiable VLANs.
The applicable port cannot be set because it belongs to a channel
group.
Set the applicable port as a port-channel interface.
The specified port cannot be set because it belongs to a channel
group or the specified port channel does not exist.
The specified interface cannot be set because it does not belong to
the VLAN.
The applicable port cannot be set because it belongs to a channel
group.
ip source binding
setting that specifies the
no ip dhcp snooping vlan
no ip arp inspection vlan
vlan.
ip source binding
ip arp inspection vlan
Index
setting
cannot
669