description
description
Sets supplementary information. This command can be used as a comment about the line.
Note that when this command is set, information can be checked by using the
interfaces
Input format
To set or change information:
description
To delete information:
no description
Input mode
(config-if)
Parameters
<String>
Sets supplementary information for an Ethernet interface.
1.
2.
Default behavior
Null
is set.
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
None
Related commands
interface fastethernet
interface gigabitethernet
76
or
ifDescr
(SNMP MIB) operation command.
<String>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Specify a character string that is no more than 64 characters. For details about
the characters that can be specified, see Specifiable values for parameters.
show