Table of Contents
Advertisement
mac qos-flow-list
Creates the MAC QoS flow list used to set QoS flow detection and operation settings. A
maximum of 1024 IPv4 and MAC QoS flow lists can be created for a Switch. A maximum of
1024 entries can be created for flow detection and operation settings.
Input format
To set or change information:
mac qos-flow-list
To delete information:
no mac qos-flow-list
Input mode
(config)
Parameters
<QoS flow list name>
Specify the name of a MAC QoS flow list.
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
The names of existing IPv4 QoS flow lists cannot be set.
Related commands
mac qos-flow-group
mac qos-flow-list resequence
qos (mac qos-flow-list)
remark
<QoS flow list name>
<QoS flow list name>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Set 3 to 31 characters, the first character of which must be a non-numeric
character. For details about the characters that can be specified, see
Specifiable values for parameters.
mac qos-flow-list
335
Advertisement
Table of Contents
