Alaxala AX1250S Software Manual page 688

Index
Message
vlan : Can't change mode from
{nothing|protocol-based|mac-ba
sed } to
{nothing|protocol-based|mac-ba
sed }.
vlan : Can't delete vlan
configuration because of
default vlan.
vlan : Can't setting port[<IF#>]
because of channel-group port.
vlan : Data(mac-address) is
invalid.
vlan : maximum number which can
be used is exceeded.
vlan : Not found protocol name.
vlan : Some port's setting have
been failed.
vlan : Some setting can't have
been done because of vlan
unmatch.
Vlan : This command is different
from vlan configuration in
channel-group port.
vlan[<VLAN ID>] : Can't change
mode from
{nothing|protocol-based|mac-ba
sed} to
{nothing|protocol-based|mac-ba
sed}.
vlan[<VLAN ID>] : Can't delete
it because data is not
corresponding.
vlan[<VLAN ID>] : Can't delete
port-channel configuration
referred by other
configuration.
vlan[<VLAN ID>] : Can't delete
vlan configuration referred by
other configuration.
664
Explanation
The VLAN types of the specified VLAN modes do not match (VLAN
range specification).
The VLAN cannot be deleted because it is the default VLAN.
The specified port number cannot be set from the port because the
port number belongs to the channel group.
<IF#>: Interface port number
mac-address
The specified
in the specifiable range.
No more entries can be generated because the number of VLANs
exceeds the maximum number of entries.
The VLAN cannot be set because
set.
Setting of a port from a channel has failed.
Some VLANs cannot be set because at least one of the VLANs does
not exist.
The VLAN cannot join the port channel because the VLAN
configuration is different.
The VLAN types of the specified VLAN modes do not match. (Only
VLAN is specified.)
<VLAN ID>: VLAN ID
The specified VLAN cannot be deleted because it does not exist.
mac-address
The specified
registered.
mac-address-table
The specified
does not exist.
<VLAN ID>: VLAN ID
The VLAN cannot be deleted because it is being used by another
configuration.
<VLAN ID>: VLAN ID
The VLAN cannot be deleted because it is being used by another
configuration.
<VLAN ID>: VLAN ID
cannot be registered because it is not
vlan-protocol
has not been
cannot be deleted because it is not
cannot be deleted because it