Table of Contents
Advertisement
mac-authentication radius-server dead-interval
monitoring timer counter continues without being reset and runs for 10 minutes
(default value).
Notes
1.
All MAC-based authentication settings take effect when the
system-auth-control
2.
See Configuration commands and MAC-based authentication modes for the
authentication mode in which the command's settings are operable.
3.
If three or more MAC-based authentication RADIUS servers are configured and
another MAC-based authentication RADIUS server becomes the current server after
the monitoring timer starts, the monitoring timer is not reset and continues to run.
4.
In general, when the monitoring timer has started, it does not reset until it expires.
However, as exceptions, it resets in the following cases:
5.
If the monitoring timer expires while the authentication sequence is being executed
on a terminal subject to authentication, restoration of the primary MAC-based
authentication RADIUS server is not performed until the executed authentication
sequence is completed.
Related commands
aaa authentication mac-authentication
mac-authentication port
mac-authentication system-auth-control
mac-authentication radius-server host
536
command is set.
When
mac-authentication dead-interval 0
mac-authentication radius-server dead-interval
When information about the MAC-based authentication RADIUS server
operating as the current server is deleted by using the
radius-server host
When the
clear radius-server
configuration command
operation command is executed
mac-authentication
is configured by using the
command
mac-authentication
Advertisement
Table of Contents
