36.1.15 Ipv4, Arp, And Icmp Information - Alaxala AX1250S Software Manual

Configuration command reference
Hide thumbs Also See for AX1250S:
Table of Contents

Advertisement

36.1.15 IPv4, ARP, and ICMP information

Table 36-15 IPv4, ARP, and ICMP error messages
Message
ip : Inconsistency has occurred
in a setting of IP address and
route.
ip : IP address is duplicate
between interface and nexthop.
ip : maximum number of route are
already defined.
ip[<VLAN
ID>] : Can't delete IP
configuration with route
configuration.
ip[<VLAN
ID>] : Duplicate
network address.
ip[<VLAN
ID>] : maximum number
of IP configuration are already
defined.
Explanation
There is an inconsistency between an address set by using IP
information and a next-hop network address set by using route
information.
Set the next hop correctly.
An address set by using IP information and a next-hop address set
by using route information are the same.
Set the addresses that do not duplicate one another.
No more route information can be set.
Revise the network configuration.
Route information exists.
Delete the route information, and then delete the IP information.
<VLAN
ID>: VLAN ID
An IP address of the same network address is defined for another
VLAN.
Set the IP address so that all network addresses are unique.
<VLAN
ID>: VLAN ID
An IP address for the same network address is set for the Web
authentication IP address.
Set the IP address so that it does not duplicate the network address
for the Web authentication IP address.
<VLAN
ID>: VLAN ID
No more IP addresses can be set.
Revise the network configuration.
<VLAN
ID>: VLAN ID
Index
671

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax1240s

Table of Contents