Table of Contents
Advertisement
mac qos-flow-group
Enables the QoS functionality by applying a MAC QoS flow list to an Ethernet interface or a
VLAN interface.
Input format
To set information:
mac qos-flow-group
To delete information:
no mac qos-flow-group
Input mode
(config-if)
Parameters
<QoS flow list name>
Specify the name of a MAC QoS flow list.
1.
2.
in
Inbound is set.
in
: inbound (A receiver side setting)
1.
2.
Default behavior
None
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
<QoS flow list name>
<QoS flow list name>
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
Set 3 to 31 characters, the first character of which must be a non-numeric
character. For details about the characters that can be specified, see
Specifiable values for parameters.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
None
mac qos-flow-group
in
in
333
Advertisement
Table of Contents
