mac-address-table static
Impact on communication
None
When the change is applied
The change is applied immediately after setting values are changed.
Notes
1.
If you set a static entry for the default VLAN (VLAN ID = 1), explicitly set
output destination interface.
2.
If
interface
matching the destination MAC address. In addition, if a frame is received from an
interface other than the one specified for frames as matching the source MAC
address, it is discarded.
3.
If the output destination interface and the VLAN specified by using this command are
operating using the automatic VLAN assignment functionality of the Layer 2
authentication functionality, the MAC address cannot be registered as a static entry.
Related commands
vlan
118
has been set, a frame is output to the interface specified for frames
vlan 1
for the