Table of Contents
Advertisement
mac-authentication timeout quiet-period
Sets the time during which re-authentication will not be attempted (re-authentication delay
timer) for the same terminal (MAC address) when authentication fails. No authentication
processing is performed during this period.
Input format
To set or change information:
mac-authentication timeout quiet-period
To delete information:
no mac-authentication timeout quiet-period
Input mode
(config)
Parameters
<Seconds>
Sets the re-authentication delay timer in seconds. If you want to restart authentication
processing immediately after authentication fails, set 0.
1.
2.
Default behavior
No authentication processing for the same terminal is performed for 300 seconds after
MAC-based authentication failure.
Impact on communication
None
When the change is applied
1.
When authentication fails
2.
When the re-authentication delay timer that is running times out and the value of the
timer becomes 0.
3.
When the
to cancel the authentication of specific terminals or the authentication of all
authenticated terminals for an entire Switch.
Default value when this parameter is omitted:
This parameter cannot be omitted.
Range of values:
0, 60 to 86400 (seconds)
clear mac-authentication auth-state
mac-authentication timeout quiet-period
<Seconds>
operation command is executed
551
Advertisement
Table of Contents
